| Type | Max. input (mm) | Adjusting range of output (mm) | Capacity (t/h) | Motor power (kW) | weight (t) | Overall dimensions (L×W×H)(mm) | |
| PYB | 600 | 65 | 12-25 | 12-25 | 30 | 5 | 2800×1300×1700 |
| PYD | 35 | 3-15 | 5-23 | 5.5 | |||
| PYB | 900 | 115 | 15-50 | 50-90 | 55 | 10.2 | 3050×1640×2350 |
| PYZ | 60 | 5-20 | 20-65 | 10.2 | |||
| PYD | 40 | 3-13 | 15-50 | 10.3 | |||
| PYB | 1200 | 145 | 20-50 | 110-200 | 110 | 24.7 | 4152×2300×2980 |
| PYZ | 100 | 8-26 | 50-150 | 25 | |||
| PYD | 50 | 3-15 | 18-105 | 25.6 | |||
| PYB | 1750 | 215 | 25-60 | 280-480 | 160 | 50.3 | 4870×3800×4192 |
| PYZ | 185 | 10-30 | 115-320 | 50.3 | |||
| PYD | 85 | 5-15 | 75-230 | 50.4 | |||
| PYB | 2200 | 300 | 30-60 | 590-1000 | 260-280 | 80 | 7705×3430×4852 |
| PYZ | 230 | 10-30 | 200-580 | 80 | |||
| PYD | 100 | 5-15 | 120-340 | 81.4 | |||
Spring Cone Crusher breaks material by squeezing or compressing it between convex and concave shaped surfaces covered by manganese as the wear surface. Normally used as the second or third stage crusher. The cone crusher has been developed to crush high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect.
The spring cone crusher has been developed to crush feed materials into desired end products efficiently, reliably and economically.This series offers the highest crushing efficiency and end product quality with the lowest cost per tone production.
The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Features:
1. The spring cone crushers crushes by the change of the gap in the crushing cavity;
2. High reduction ratio, high performance, low power consumption, and uniform size products.
1.Cone crusher is used in coal industry
Coal crusher is completely different from the traditional toothed roll crusher. It is mainly applied to crush fragile lump material in primary and secondary stages in the industry of coal mining, electricity, mine, metallurgy and chemicals. It can crush the raw coal directly without pre-screening and pre-selecting to simplify the process flows of crushing coal, lower the factory buildings, and reduce the construction and production cost of coal preparing plant and power plant. We provide you the best quality spring cone crusher which is always used in coal industry.
2. Cone crusher can be used in quartzite crushing
Quartzite stone is a decorative stone and can be used as paving blocks, cover walls, roofing tiles, flooring, stair steps, riprap, crushed stone and roofing granules. For people who has quartzite mines, spring cone crusher is an ideal crusher equipment to crush stones of medium or above medium hardness, after the primary crusher, spring cone crusher can be used to crush the quartzite more fine.
3. Cone crusher can be used in limestone crushing
Limestone is the important raw materials for building aggregates and cement. In limestone processing equipments, crushing and grinding process are very important. The Spring Cone crusher adopts the dry oil and water seal types, which prevents the dust from entering the machine body. The crushing cavity type is decided by the ores usage, so the standard is suitable for the mid crushing; the mid cone crusher is suitable for fine crushing; while the short head is suitable for the super thin crushing.
